Glemham gates with a curved cut board top. These solid pedestrian gates have a rectangular 50mm thick frame and boards fixed to the front and running past the frame and cut in to a curve.

Photo's above:

1. An Iroko gate hung on the back of the brick archway to avoid the need of a surround to close the gap at the top of the gate which would be apparent if wall plates were used in the centre of the brick archway.

2. A Larch gate hung in the centre of an archway on wall plates, leaving a gap at the top of the gate.  

3. The same gate but from reverse, clearly showing the construction of the gate

If you prefer a solid curved top rail on your gate please go to Glemham gate - curved top rail

If you have an archway but prefer a full surround to avoid gaps at the top of your gate please go to or we can supply surround for these cut board gates to Glemham gate - curved top rail and surround

Which Curve Shape?
The standard curve is approximately 15cm high.
However the curve can vary to suit your requirements up to a full semi circle continuous curve as shown above. Additional costs will be incurred for non standard curves, please contact us to discuss this.  
The gates above have a continuous curve to fit an existing brick archway.

Unlike other designs the Glemham of curved top gates these have their heights measured at the centre, not at the hanging stile.
For in between sizes please select the width or height up for pricing purposes.

Click here for more information on timber types

         

Below is a list of key points to help you quickly and easily compare gate designs:

• ·  Frame Size:   50mm
• ·  Visual base rail :   No
• ·  Raised Manors ( Stiles rise above the top line):   No
• ·  HardwoodTimbers available:  Sapele, Iroko, Oak
  
• ·  Widths available:  750mm to 1.2m
• ·  Heights available:  1.17m to 2.07m
• ·  In between widths and heights available: Yes
•  Variations:    Curve shape can vary - extra cost